0
0.00 €
0 items
GMS Carbon CAI is a single piece, large volume, carbon fiber intake system with integrated bracket and large volume dual cone air filter element. This upgrade provides improved air flow, especially at high rpm range, slightly quicker throttle response, distinctive induction and blow off discharge sound and weight reduction.
Large diameter, thin wall carbon piping, combined with large volume dual cone air filter element, provides 46% higher air flow compared to OEM induction system across entire rpm range and staggering 118% higher peak air flow in high rpm range, which equals to 0,065 Bar lower pressure drop at max rpm, which in theory means a power increase of a 9hp. This improves engine performance in higher rpm range, delivering slightly higher peak power, especially noticeable on tuned / remapped engines with free-flowing exhaust system.
Due to shorter intake path, the turbo spool and throttle response are improved as well, while low positioned air filtering element in combination with direct fresh air inlet from the right-side scoop is ensuring low IAT (air intake temperature) and stable engine performance, especially in demanding track conditions with high ambient temperatures.
Due to thin wall carbon piping and short inlet path, the induction sounds are noticeably louder, providing distinctive turbo spool, charge and blow off sound. Use headphones and check the video in description below.
Due to use of carbon fiber as a main construction material, the entire assembly weighs only 589g. A staggering 6.6x less, compared to 3230g for OEM assembly. For construction process, high end, prepreg carbon is being used and processed in autoclave.
In terms of aesthetics, entire assembly is a single piece fully carbon fiber piping with integrated bracket in same pattern as OEM 4C carbon exterior parts. Finish is available as a raw / polished carbon fiber with its satin appearance or as an optional 3x clear coated high gloss version.
Mounting hardware is included and comes in stainless steel as a standard or aluminum as an option. The air filter element is a high flow dual cone air filter, available also as a replacement part separately.
Onboard sound clip: click
Due to the handcrafted nature of this car artwork, each piece may have slight differences
Our carbon fiber products are durable, but require care and maintenance to keep looking good. Keep the products clean, minimize exposure to the sun, and wax when necessary, to avoid pre-mature aging
Do not use aggressive cleaning chemicals
Price range: 490.00 € through 630.00 € Your local VAT applies for EU countries
Price range: 490.00 € through 630.00 € Your local VAT applies for EU countries
GMS Carbon CAI is a single piece, large volume, carbon fiber intake system with integrated bracket and large volume dual cone air filter element. This upgrade provides improved air flow, especially at high rpm range, slightly quicker throttle response, distinctive induction and blow off discharge sound and weight reduction.
Large diameter, thin wall carbon piping, combined with large volume dual cone air filter element, provides 46% higher air flow compared to OEM induction system across entire rpm range and staggering 118% higher peak air flow in high rpm range, which equals to 0,065 Bar lower pressure drop at max rpm, which in theory means a power increase of a 9hp. This improves engine performance in higher rpm range, delivering slightly higher peak power, especially noticeable on tuned / remapped engines with free-flowing exhaust system.
Due to shorter intake path, the turbo spool and throttle response are improved as well, while low positioned air filtering element in combination with direct fresh air inlet from the right-side scoop is ensuring low IAT (air intake temperature) and stable engine performance, especially in demanding track conditions with high ambient temperatures.
Due to thin wall carbon piping and short inlet path, the induction sounds are noticeably louder, providing distinctive turbo spool, charge and blow off sound. Use headphones and check the video in description below.
Due to use of carbon fiber as a main construction material, the entire assembly weighs only 589g. A staggering 6.6x less, compared to 3230g for OEM assembly. For construction process, high end, prepreg carbon is being used and processed in autoclave.
In terms of aesthetics, entire assembly is a single piece fully carbon fiber piping with integrated bracket in same pattern as OEM 4C carbon exterior parts. Finish is available as a raw / polished carbon fiber with its satin appearance or as an optional 3x clear coated high gloss version.
Mounting hardware is included and comes in stainless steel as a standard or aluminum as an option. The air filter element is a high flow dual cone air filter, available also as a replacement part separately.
Onboard sound clip: click
Due to the handcrafted nature of this car artwork, each piece may have slight differences
Our carbon fiber products are durable, but require care and maintenance to keep looking good. Keep the products clean, minimize exposure to the sun, and wax when necessary, to avoid pre-mature aging
Do not use aggressive cleaning chemicals
